Changing the Oil In Your Car
Performing car maintenance yourself can save you money in the long run and assure yourself that it is done correctly. It can be done according to your schedule as well and can be a great responsibility to pass on to your children. Here are a few steps to change the oil in your car.
Prepare the Vehicle
Gather all the tools and parts that you need before you start. This will require that you research the vehicle to see what is needed. If your car is older and parts are scarce, you may need to consult a third party provider or custom machine shop milton on to get them. Jack your car up on a lift to get a better look at what you are doing.
Drain the Old Oil
Situate a pan under your automobile where you suspect the oil will come from. Unscrew the plug that barricades it back then step back and watch it drain. This process can take some time and will take tools to complete. Determine where the oil filter is while this is happening and take it off. Remove anything that could be left behind including the O-ring that seals it. Throw out the old one in the proper disposal.
Put New Oil In Your Car
When the flow from your car stops, screw the plug back into your car. Be sure that it is tight before you continue. Secure this piece while avoiding it being too tight. Put a new filter in where it belongs including any gaskets that must be replaced. This will remove the impurities that flow through the new fluid that you will add shortly. Pour the new oil into your vehicle until your dipstick indicates that it is full. Analyze your automobile for any leaks before you lower it and turn it on.